Pioneer DVJ-X1 - Professional DVD Turntable Manuale di formazione - Pagina 23

Sfoglia online o scarica il pdf Manuale di formazione per Lettore DVD Pioneer DVJ-X1 - Professional DVD Turntable. Pioneer DVJ-X1 - Professional DVD Turntable 38. Dvd video deck

Stampa la pagina
How to quit Service mode
Press the MASTER TEMPO button to quit Service mode.
List of error codes
When an error is detected, one of the following error codes is displayed on the FL display.
Error code
E-7001
ATAPI system (drive) error
E-7002
DMA FPGA device error
E-7003
CAP FPGA device error
E-7004
CAP FPGA memory error
E-7005
VMC FPGA device error
E-7006
VMC FPGA memory error
E-7007
AV1 device error
E-7008
GSL device error
E-7009
GSL memory error
E-7010
TI DSP device error
E-7011
MOT DSP device error
E-7012
TE4300 device error
E-7013
VDEC device error
E-7014
VDEC memory error
E-7017
AV1 memory error
E-7015
FPGA download error
E-7016
"No ID number" input error
E-7202
Incompatible region number
E-7201
TOC not readable
E-8301
Error during startup
E-8302
Error during playback
E-8303
Other error of the player section
E-9101
Error in mechanical operations The error indication is cleared when
Warning indications
The following warning indications are displayed on the FL display.
Warning display
ROM ERROR
This is displayed when any abnormality is detected in the program area of the flash memory.
DRIVE ERR
This is displayed when any abnormality is detected in the player section during initialization.
NOT VIDEO FORMAT
This is displayed when a DVD other than video-formatted DVDs (VR format, DVD-A, etc.) is loaded.
DISABLE DJ MODE
This is displayed during DVD playback in DJ mode, while the areas that cannot be controlled in DJ mode are
being played back.
Description
Unrecoverable: Turn the power off.
The error indication will be cleared.
Unrecoverable: Turn the power off.
The error indication will be cleared.
The error indication is cleared when
the EJECT process is finished.
The error indication is cleared when
the EJECT process is finished or
startup is completed successfully.
the EJECT process is finished or
LOAD IN is completed.
Check the connection with the player section.
Displayed when a device error is reported by the
CPU during communication upon initialization.
Check the connection, power voltage, and clock
waveform of the device in failure.
Check the device and the serial-communication system.
Input the ID number.
A disc having an incompatible region number was loaded.
Apart from abnormality of the player section,
defectiveness of the disc may be the cause.
Check the slot mechanical system.
Description
23
Checkpoint