Pioneer DVL-909 Manuale di servizio - Pagina 15
Sfoglia online o scarica il pdf Manuale di servizio per Lettore DVD Pioneer DVL-909. Pioneer DVL-909 47. Dvd player/dvd ld player
Anche per Pioneer DVL-909: Manuale (2 pagine)
Stampa la pagina
3.4 EXPANSION FUNCTION 1
Set the reception mode of expansion function by pressing [TEST]
(5E) key of the test mode remote control unit, then expansion function
is able to execute by pressing the key of [0] to [9].
Indication for the most significant digit becomes "T" during the
reception mode of expansion function. (This mode can on and off
with toggle.)
(1) LD On
Turn the laser diode to on by pressing [TEST] and [1] keys in order.
(2) Focus On
Focus locks by pressing [TEST] and [2] keys in order.
(3) Focus Sweep
Repeat focus sweep by pressing [TEST] and [3] keys in order.
(4) Spindle FG Servo
Rising up the spindle and FG servo becomes on by pressing [TEST]
and [5] keys in order.
(5) AGC On/Off
Switch the AGC on and off with toggle by pressing [TEST] and [7]
keys in order.
(6) Jitter Value Indication.
It becomes the jitter-value indication mode by pressing [TEST] and
[DIG/ANA] keys in order.
(7) DSP coefficient indication of FTS system.
Set up the address (four digits) of the coefficient that it wants to see
by the point of search address input, then real time indicates the
coefficient in OSD by pressing [TEST] and [9] keys in order.
(8) CD Error Rate Indication
Indicate the value in OSD after measuring is completed by pressing
[TEST] and [0] keys in order after set up the measuring time (1 to 8
seconds) by the point of search address input.
3.6 List of Test Mode Function
Contents of Command
Open
Close
Stop
Play (DVD is only tracing.)
Play (DVD is with decode.)
Pause on
Pause on/off
Search address input (0 to 9)
Use for other numerical value input
DV-505, DVL-909, DV-S9
3.5 EXPANSION FUNCTION 2
Set the reception mode of expansion function 2 by pressing [HILITE/
INTRO] (55) key of the remote control unit, then expansion function
2 is able to execute by pressing the key of [0] to [9].
(1) Forced DVD Setting
In the checker mode, set up the condition that DVD is attached
forcibly except for the result of disc distinction by pressing [HILITE/
INTRO] and [1] keys in order.
In the no checker mode (normal test mode), once execute the setting
but abandan it soon.
Therefore, perform the disc distinction again for the safety when
rising up the player in this condition.
(2) Forced CD Setting
In the checker mode, set up the condition that CD is attached forcibly
except for the result of disc distinction by pressing [HILITE/INTRO]
and [3] keys in order.
In the no checker mode (normal test mode), once execute the setting
but abandan it soon.
Therefore, perform the disc distinction again for the safety when
rising up the player in this condition.
(3) Execute The Disk Distinction
In the checker mode, execute the disc distinction result by pressing
[HILITE/INTRO] and [0] keys in order.
Key Name of
Condition
Remote Control Unit
STOP
REPEAT A
OPEN
REPEAT A
PLAY
REPEAT B
STOP
TV/LDP
STOP
PLAY
PLAY
CX
PLAY/PAUSE
PAUSE
0 to 9
Mode of
Remote Control Unit
A8-48
A8-48
A8-44
A8-0F
A8-17
A8-0E
A8-18
A8-00 to 09
15