Pioneer PRV-LX1 Manuale del protocollo di comando - Pagina 18

Sfoglia online o scarica il pdf Manuale del protocollo di comando per Lettore DVD Pioneer PRV-LX1. Pioneer PRV-LX1 20. Dvd-video recorder
Anche per Pioneer PRV-LX1: Bollettino informativo sul prodotto (5 pagine), Avvio rapido (5 pagine), Manuale supplementare (1 pagine), Manuale del protocollo (14 pagine), Modifica dell'elenco delle decisioni (6 pagine), Manuale del software (24 pagine), Manutenzione (5 pagine), Bollettino informativo sul prodotto (6 pagine), Manuale di istruzioni per l'uso (38 pagine), Manuale di aggiornamento (2 pagine), Aggiornamento del sistema (10 pagine), Aggiornamento del sistema (10 pagine), Manuale di formazione (38 pagine), Manuale (38 pagine)

8.2 Playback Delay

When the PRV-LX1 is issued a play command, it experiences up to a +2 frames delay in the execution of

the command. The decoding system requires 2 frames to accomplish setup.

When issuing a "pause" command while recording, the PRV-LX1 continues recording within the same

title/clip, maintaining continuous time-code.

* To issue a "pause" command the user must issue a "shuttle 0" command. This pauses the

recording to insert a chapter mark at the closest GOP of encoded video then recording

continues. The [Auto Chapter] setting should be set to manual.

* Issuing a "stop" command closes the recorded title/clip as defined by the DVD spec. All

subsequent recordings via serial control start with a new title/clip and the LX1 begins

generating new time-code within that title/clip.

When the PRV-LX1 is the source device being controlled via serial control with an NLE or edit control

device, the following limitation applies.

When an external control device is controlling the LX1 and a "search and play" command is sent via

serial control, the PRV-LX1 reports back frame numbers every 50ms. The PRV-LX1 cannot return

the precise time-code. The unit may return the same value as requested earlier or may skip the

frame while Recording or Playing.

* Manually record without using serial control when the recorder is to be used as a source. Or,

if the external control device offers the ability to change the time-code query speeds, change

the speed to 50ms to match the PRV-LX1.

Page 17 of 18

PRV-LX1 RS-422A Protocol