Pioneer HTP-GS1 Manuale di istruzioni per l'uso - Pagina 18
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Sistema di altoparlanti Pioneer HTP-GS1. Pioneer HTP-GS1 35. 5.1ch surround system
Stampa la pagina
05
Listening to your system
Chapter 5
Listening to your system
Auto listening mode
The Auto listening mode is the simplest way to listen to
any source as it was mastered: the output from the
speakers mirrors the channels in the source material.
If you set up the system for Front surround (page 7), the
Front Surround modes will give the best results (see
Using Front Surround on page 19).
•
Press SURROUND to select the AUTO listening
mode.
If the source is Dolby Digital or DTS, the front panel 2 D
or DTS indicator lights.
• You can also use the SURROUND button on the
display unit to change the listening mode.
Listening in surround sound
You can listen to stereo or multichannel sources in
surround sound. Surround sound is generated from
stereo sources using one of the Dolby Pro Logic
decoding modes.
If you set up the system for Front surround (page 7), the
Front Surround modes will give the best results (see
Using Front Surround on page 19).
•
Press SURROUND repeatedly to select a listening
mode.
• You can also use the SURROUND button on the
display unit to change the listening mode.
The choices that appear in the display will vary according
to the type of source that's playing.
If the source is Dolby Digital or DTS, the front panel 2 D
or DTS indicator lights.
18
En
–
MCACC
/TUNE
TEST TONE VIDEO IN
7
8
9
SURROUND
SOUND
+
+
INPUT
CHANNEL
VOLUME
DISPLAY
–
–
RDS DISP
AXD7442
–
/TUNE
MCACC
TEST TONE VIDEO IN
7
8
9
SURROUND
SOUND
+
+
INPUT
CHANNEL
VOLUME
DISPLAY
–
–
RDS DISP
AXD7442
• AUTO – Auto listening mode (see above)
• DOLBY PL (Dolby Pro Logic) – 4.1 channel surround
sound for use with any two-channel source
• MOVIE (Dolby Pro Logic II Movie) – 5.1 channel
surround sound, especially suited to movie sources,
for use with any two-channel source
• MUSIC (Dolby Pro Logic II Music) – 5.1 channel
surround sound, especially suited to music sources,
for use with any two-channel source; see Dolby Pro
Logic II Music settings below
• STEREO – See Listening in stereo on page 19
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music mode (see
above), there are three settings you can adjust: Center
Width, Dimension, and Panorama.
+
SET UP
/TUNE
1
–
/ST
ENTER
–
SOUND
MCACC
/TUNE
ADVANCED
0
1
With Dolby Pro Logic II Music mode active, press
SOUND .
2
Use
(cursor left/right) to select C WIDTH,
DIMEN. or PANORAMA then press ENTER .
• C WIDTH (Center Width): Provides a better blend of
the front speakers by spreading the center channel
between the front right and left speakers, making it
sound wider (higher settings) or narrower (lower
settings)
• DIMEN. (Dimension): Adjusts the depth of the
surround sound balance from front to back, making
the sound more distant (minus settings), or more
forward (positive settings)
• PANORAMA: Extends the front stereo image to
include the surround speakers for a 'wraparound'
effect.
3
Use
(cursor up/down) to adjust the setting
then press ENTER to confirm.
TIMER REC REC MODE
+
SR
3
+
/ST
MENU
TEST TONE VIDEO IN
9