Pioneer VSX-S300-k Istruzioni operative - Pagina 9

Sfoglia online o scarica il pdf Istruzioni operative per Sistema di altoparlanti Pioneer VSX-S300-k. Pioneer VSX-S300-k 36. Audio/video multi-channel receiver
Anche per Pioneer VSX-S300-k: Manuale di avvio rapido (33 pagine)

Stampa la pagina

Connecting your equipment

Chapter 2:

Connecting your

equipment

Determining the speakers' application

By connecting the left and right front speakers (L/R), the

center speaker (C), the left and right surround speakers (SL/

SR), the left and right surround back speakers (SBL/SBR) (or

the left and right front height speakers (FHL/FHR)), and the

subwoofer (SW), a surround sound system up to 7.1 channel

can be enjoyed.

The 5.1 channel surround system is the most commonly-

used in home theaters. To achieve the best possible surround

sound, install your speakers as shown below.

5.1 channel surround

6.1 channel surround

system:

(Surround back) system:

7.1 channel surround

(Surround back) system:

(Front height) system:

FHL

SBR

SBL

Important

• To connect the surround back or front height

speakers, an additional amplifier is required. Connect

the additional amplifier to the PRE OUT SURR BACK/

FRONT HEIGHT outputs of this unit and connect the

surround back or front height speakers to the additional

amplifier (see Connect the surround back or front height

speakers on page 11).

Another way, you can use the speakers connected to the B

speaker terminals to listen to stereo playback in another

room. See Switching the speaker terminal on page 11 for the

listening options with this setup.

• You will not be able to connect the B speakers if you

connect the surround speakers in the main zone.

When using the B speakers, main zone sound will only be

output from the front speakers, the center speaker and

the subwoofer. (No sound is output from the surround

and surround back speakers.)

• Speaker B does not allow for subwoofer connection.

Please use full-range speakers.

FHR

Some tips for improving sound quality

Important

• Speakers such as S-HV500-LR and S-HV600B may have

specific installation methods. For more details, refer to

the operating instructions supplied with speaker.

Main zone

Speaker B

Where you put your speakers in the room has a big effect on

the quality of the sound. The following guidelines should help

you to get the best sound from your system.

• It is best to angle the speakers towards the listening

position. The angle depends on the size of the room. Use

less of an angle for bigger rooms.

• Refer to the chart below for placement of speakers you

intend to connect.

FHL

FHR

30 30

120

SBL

SBR

Place the surround speakers at 120º from the center. If

you, (1) use the surround back speaker, and, (2) don't

use the front height speakers, we recommend placing

the surround speaker right beside you.

If you intend to connect only one surround back

speakers, place it directly behind you.

If the surround speakers cannot be set directly to the

side of the listening position with a 7.1-channel system,

the surround effect can be enhanced by turning off the

Up Mix function (see Setting the Up Mix function on

page 24).

• For the best stereo effect, place the front speakers 2 m to

3 m apart, at equal distance from the TV.

• If you're using a center speaker, place the front speakers

at a wider angle. If not, place them at a narrower angle.

• Place the center speaker above or below the TV so that the

sound of the center channel is localized at the TV screen.

Also, make sure the center speaker does not cross the

line formed by the leading edge of the front left and right

speakers.