Ariston LBC 3C26 WF Manuale di riferimento giornaliero - Pagina 5
Sfoglia online o scarica il pdf Manuale di riferimento giornaliero per Lavastoviglie Ariston LBC 3C26 WF. Ariston LBC 3C26 WF 8.
Stampa la paginaLOADING THE RACKS
CUTLERY RACK
Knives and other utensils with sharp edges must be positioned
with the blades facing downwards.
UPPER RACK
(loading example for the upper rack)
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be fold
or unfold to optimize the arrangement
of crockery inside the rack. Wine
glasses can be placed safely
in the foldable flaps by inserting
the stem of each glass into
the corresponding slots.
Depending on the model:
• to unfold the flaps there is needed
to slide it up and rotate or release
it from the snaps and pull it down.
• to fold the flaps there is needed
to rotate it and slide flaps down
or pull it up and attach flaps to the snaps.
The third rack was designed
to house the cutlery.
Arrange the cutlery as shown
in the figure.
A separate arrangement
of the cutlery makes collection
easier after washing and improves
washing and drying performance.
The geometry of the rack makes
it possible to place such small
items as coffee cups in the area
in the middle.
Load delicate and light dishes:
glasses, cups, saucers, low salad
bowls.
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted:
high position to place bulky crockery
in the lower basket and low position to make
the most of the tip-up supports by creating
more space upwards and avoid collision with
the items loaded into lower rack.
The upper rack is equipped with a Upper Rack
height adjuster (see figure), without pressing
the levers, lift it up by simply holding the rack
sides, as soon as the rack is stable in its upper
position. To restore to the lower position, press
the levers A at the sides of the rack and move the basket downwards.
We strongly recommend that you do not adjust the height of the rack
when it is loaded.
NEVER raise or lower the basket on one side only.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should
ideally be placed at the sides to avoid interferences with the spray arm.
The lower rack has tip-up supports which can be used in a vertical
position when arranging plates or in a horizontal position (lower)
to load pans and salad bowls easily.
(loading example for the lower rack)
ZONE WASH 3D
Zone Wash 3D uses additional water jets
located both: in the lower and upper part
of the dishwasher (marked with orange color)
to wash more intensively heavily soiled items
by increasing water coverage on dishes.
Example: Load pots and casseroles facing lower
part of Zone Wash 3D components and activate
the Zone Wash 3D option on the panel.
EN
5