Ariston 65 DRY Manuale - Pagina 31

Sfoglia online o scarica il pdf Manuale per Scaldabagno Ariston 65 DRY. Ariston 65 DRY 41.

PAIRING BETWEEN THE POWER METER SMART SWITCH AND THE WATER HEATER

After connecting the indoor water heater, check the status of the Wi-Fi Led on the Power Meter Smart

Switch, if it is fixed blue, then you will not need to do any other operation. Otherwise if the led is blinking

blue, follow the association procedure described in this sheet.

On the water heater control panel:

A. You must ensure that the Wi-Fi " " button/led is on (fixed or blinking).

If not then press the Wi-Fi " " button to turn it on.

B. Press the combination of Wi-Fi and ON/OFF " ", buttons together for 5 seconds (the Wi-Fi " " button/

led on the water heater blink quickly).

Open the box containing the Power Meter Smart Switch and proceed as follows:

C. Press Wi-Fi button for 5 seconds to start pairing with Wi-Fi water heater (Wi-Fi Led on Power Meter

Smart Switch blinking fast BLUE)

D. Wait a few seconds until the Wi-Fi led on the Power Meter Smart Switch remains BLUE fixed.

E. Close the Power Meter Smart Switch in the box.

If not paired (the Wi-Fi Led of the Power Meter Smart Switch will be RED bright fixed), repeat the proce-

dure described in point B above.

ATTENTION! Open wires in the wall box, open it with caution

Led/button code for Power Meter Smart Switch

Connection unconfigured

Connection to wi-fi water heater start pairing

Connection to wi-fi water heater in progress

Connection to wi-fi water heater successful

Temporary disconnection to wi-fi water heater

Connection to wi-fi water heater unsuccessfull

Advice for user

- Avoid positioning any objects and/or appliances that could be damaged by water leaks beneath the water

heater.

- Should you not use any water for an extended period of time, you should:

• disconnect the appliance from the electrical supply by switching the external switch to ''OFF";

• turn off the plumbing circuit taps;

- Hot water at above 50°C flowing out of the taps at the point of use could cause serious scalds or even death

from burns. Children, the disabled and the elderly are more exposed to the risk of burns. It is strictly forbid-

den for the user to perform any routine or extraordinary maintenance.

To clean the external parts use a damp cloth soaked in soap and water.

USER INSTRUCTIONS

Blink slow blue

Blink fast blue

2 Double blink + pause

Steady on blue

Blink slow blue

Steady on red

31 / EN