Ariston AURES EASY 2.4 Manuale di istruzioni per il montaggio e il funzionamento - Pagina 20
Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio e il funzionamento per Scaldabagno Ariston AURES EASY 2.4. Ariston AURES EASY 2.4 28. Instantaneous electric water heater
Stampa la pagina
ID
4. Insert the cable through channel ' A ' (Fig 4) for side entry, after breaking plastic wall and clean
burrs.
5. Connect the cable to terminal block and fully tighten them as follow.
BROWN or RED for LIVE (L)
BLUE or BLACK for NEUTRAL(N)
GREEN or GREEN/YEOLLOW for EARTH(E)
6. Make sure the wiring connection is tight, then close the front cover.
7. Fix back the screw A.
OPERATING INSTRUCTIONS
TO TAKE THE SHOWER FOR THE USER
IMPORTANT!
THE HEATER TANK MUST BE FILLED UP WITH WATER BEFORE TURN ON THE ELECTRIC SUPPLY THIS
IS TO PREVENT ANY DRY BURNT DAMAGE TO THE HEATING ELEMENT.
SHOULD TURN OFF THE HEATER BEFORE TURN OFF THE Product water supply valve.
Starting
1. Turn on the main product water supply valve.
2. Switch on the electric supply on the main switch out of the shower
3. Turn on the product water supply valve on the product to clockwise until the water flow through
the shower head.
4. Rotate the control knob, the HEATING led will light up and hot water will start flowing from the
shower head.
5. Adjust the shower condition setting by:
a. Rotate the control knob in clockwise to increase the temperature or in anticlockwise to de-
crease the temperature;
b. Turn the product water supply valve in clockwise to increase the water flow decreasing the
outlet water temperature or turn it in anticlockwise to decrease water flow increasing the
outlet water temperature;
c. In rare case if inlet water is too cold, both options can be not enough to reach the desired
shower conditions.
6. Temperature adjustment (fig. 2)
There are a total of 3 different levels of power consumption, the higher number means more
power being consumed and higher outlet temperature. Rotate the knob to
heater and the water temperature remains at inlet temperature. The outlet temperature might
be unstable some external factors (i.e. Inlet temperature, Inlet water flow, inlet water pressure,
voltage, electricity fluctuation) change suddenly.
7. Select the preferred shower jet thanks to spray position lever on the shower head (for model with
3 spray shower head).
20
to turn off the