Ariston VLS Flat 50 Manuale tecnico - Pagina 7

Sfoglia online o scarica il pdf Manuale tecnico per Scaldabagno Ariston VLS Flat 50. Ariston VLS Flat 50 18. Storage electric water heaters

2. Components

Into the packaging, the following items are included:

FLAT Water Heater version choosen (power cable is already installed);

Only in PREMIUM versions, basic front panel to be mounted;

Safety valve (8 bar) to be installed on cold water inlet pipe (note: this component must be replaced

with a device in compliance with the EN 1487:2002, if this standard is mandatory in your Country);

Instruction manual.

HE1

Tanks tailored design and serie connection between

them in order to reach the highest level of heat

stratification and the lowest depth size.

Same tanks flange for all the range: 5 bolts.

Same tanks diameter for all the range: 220 mm.

Different length by capacity.

Spare parts of these items are not available!

All the range is equipped with two heating

elements: the HE1 (red coloured), closer to the hot

water outlet pipe, is used to ensure hot water for

the first shower in the fastest way while the HE2

(blue coloured), closer to the cold water inlet pipe,

is used to maximize the comfort.

HE2

The Mg anode prevents corrosion of the tank and

the heating element.

Each tank is equipped with a specific anode

according to its capacity.