Aeotec Smart Switch 6 Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Interruttore Aeotec Smart Switch 6. Aeotec Smart Switch 6 7.
Anche per Aeotec Smart Switch 6: Manuale d'uso (12 pagine)

Stampa la pagina
Size: 4 Byte, Default Value: 0
Setting
1
2
4
8
Parameter 110: Reset Parameter 111-113
Size: 1 Byte, Default Value: 0
Setting
1
Parameter 111: Set the interval time of sending report.
This parameter is used to set the interval time of sending report in Report Group 1.
Size: 4 Byte, Default Value: 600
Setting
0 - 268435456
Parameter 112: Set the interval time of sending report.
This parameter is used to set the interval time of sending report in Report Group 2.
Size: 4 Byte, Default Value: 600
Setting
0 - 268435456
Parameter 113: Set the interval time of sending report.
This parameter is used to set the interval time of sending report in Report Group 3.
Size: 4 Byte, Default Value: 600
Setting
0 - 268435456
Parameter 200: Partner ID
This parameter is used to configure the partner ID.
Size: 1 Byte, Default Value: 0
Setting
0
1 - 255
Parameter 252: Enable/Disable Lock Configuration
This parameter is used to enable/disable Lock all configuration parameters.
Size: 1 Byte, Default Value: 0
Setting
0
1
Parameter 254: Device Tag
This parameter is used to save the device tag, which will be written/ assigned in factory/ manufacturer.
Size: 2 Byte, Default Value: 0
Setting
0 - 32767
Parameter 255: Reset to default factory setting
This parameter is used to reset product to default factory setting. (There are just 2 values can be used).
Size: 4 Byte, Default Value: 0
Setting
1
Description
Report Instantaneous Voltage
Report Instantaneous Current (Amperes)
Report Instantaneous Watts
Report Accumulated kWh
Description
Reset Parameter 111-113
Description
Interval Seconds
Description
Interval Seconds
Description
Interval Seconds
Description
Aeon Labs Standard Product
Partner ID of Partner Product
Description
All configuration parameters are configurable.
All configuration parameters are not configurable (Locked).
Description
Device Tag
Description
Resets all configuration parameters to default setting.