Aeotec Smart Switch 7 Manuale - Pagina 15

Sfoglia online o scarica il pdf Manuale per Interruttore Aeotec Smart Switch 7. Aeotec Smart Switch 7 18.
Anche per Aeotec Smart Switch 7: Manuale d'uso (8 pagine), Manuale (6 pagine)

Stampa la pagina

4.9

Association Group Info

Root device

Name

Node count

Lifeline

Retransmit

4.10 Configuration

Note: R=Read Only, W=Write Only, WR=Write and Read.

Parameter Description

0x04(4)

Over-load protection.

Define a threshold power and automatically turn off switch when the load

connected bypasses the maximum allowed power regardless of always on setting.

Value

Description

Disable over-load protection

1..2415 Threshold power is 1-2145W

Note:

Over-load protection will be active if the load power exceeds the setting and lasts

for more than 30s. If be active, Indicator Light will become red light blinking and

the product will send out Notification Report (Over-load detected), and disable the

function that manually or RF control the switch state until user s set Protection State

to be unprotected through the Gateway or Controller. Even power off will still keep

Protection State.

0x08(8)

Alarm Response.

Enabled by (Alarm Settings), and determines what the switch does in the case an

alarm is triggered.

Value

Description

Disable, no reaction to alarm settings

Switch is ON

Switch is OFF

AEOTEC Engineering Specification

Profile

Function

Device Reset Locally Notification:

Issued when Factory Reset is performed.

Basic Report:

Issued when switch state has changed.

Binary Switch Report:

Issued when switch state has changed.

Color Switch Report:

Issued when a color component level of the Indicator

Light has changed.

Multilevel Switch Report:

Issued when the multilevel switch value of the Indicator

Light has changed.

Notification Report (Type=0x08; Event=0x06):

Issued when over-current detected.

General: Lifeline

Notification Report (Type=0x08; Event=0x08):

Issued when over-load detected.

Notification Report (Type=0x08; Event=0x00):

Issued when over-current or over-load is release.

Notification Report (Type=0x09; Event=0x03):

Issued when built-in unrecoverable temperature fuse

detected the internal temperature exceeds the limit and

disconnect.

Meter Report:

Issued periodically to report the current Meter reading,

and the sending frequency is related to Configuration

Parameter 0x6F (111).

Issued when the current Power, Power Consumption or

Current is over the threshold value.

Retransmit a Basic Set, Binary Switch Set or Scene

General: NA

Activation Set to the nodes associated.

Page 10

W/R Default

Size

0x096F

(2415W)