Aeotec ZW116 Manuale
Sfoglia online o scarica il pdf Manuale per Interruttore Aeotec ZW116. Aeotec ZW116 13. Single nano switch with measuring
Anche per Aeotec ZW116: Manuale d'uso (18 pagine)
Stampa la pagina
Single Nano Switch with measuring (ZW116)
Quickstart
This is a On/Off Power Switch for Europe. To run this device please connect it to your mains power supply. To
add this device to your network execute the following action:
1. Install the device according to the instructions.
2. Press the button 2 times quickly on the Nano Switch.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or
may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage
resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only
for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a
fire or near open heat sources.
What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use
in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way
communication) and every mains powered node can act as a repeater for other nodes
(meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other