Aeotec Nano Dimmer Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Controllore Aeotec Nano Dimmer. Aeotec Nano Dimmer 10.

Stampa la pagina
Setting
0
1
2
3
Parameter 122: Get the state of touch panel port
Get the state of touch panel port
Size: 1 Byte, Default Value: 0
Setting
0
5
Parameter 123: Set the control destination for external switch S1
Set the control destination for external switch S1
Size: 1 Byte, Default Value: 3
Setting
1
2
3
Parameter 124: Set the control destination for external switch S2
Set the control destination for external switch S2.
Size: 1 Byte, Default Value: 3
Setting
1
2
3
Parameter 125: Set the default dimming rate.
Set the default dimming rate.
Size: 1 Byte, Default Value: 3
Setting
1 - 255
Parameter 128: Get the current working mode
Get the current working mode.Note: This parameter is a Get-only parameter.
Size: 1 Byte, Default Value: 0
Setting
0
1
2
Parameter 129: Set the dimming principle
Set the dimming principle.
Size: 1 Byte, Default Value: 1
Setting
0
1
Parameter 130: To get what type of load the Dimmer is connected to.
To get what type of load the Dimmer is connected to.Note: This parameter is a Get-only parameter.
Size: 1 Byte, Default Value: 0
http://manual.zwave.eu/backend/make.php?lang=en&sku=AEOEZW111
Description
Enter automatic identification mode
2-state switch mode
3 way switch mode
Momentary push button mode
Description
the touch panel is not connected.
the touch panel is connected.
Description
control the output loads of itself.
control the other nodes
control the output loads of itself and other nodes.
Description
control the output loads of itself.
control the other nodes.
control the output loads of itself and other nodes
Description
The value range is 1 to 255 seconds.
Description
Unknown working mode.
2-wire mode
3-wire mode
Description
Trailing edge mode
Leading edge mode
30-09-2020 12:35
Pagina 7 van 10