Ariston DB62 Libretto di istruzioni - Pagina 12

Sfoglia online o scarica il pdf Libretto di istruzioni per Forno Ariston DB62. Ariston DB62 32. Built-in multifunction double oven

(b) To set the Timer to switch ON immediately and OFF automatically after a set cook period:

Step 1 Check that the correct time of day is set, if not follow instructions for 'Setting the Time of Day'.

Step 2 Place food onto the correct shelf position in the oven(s) and close the door(s).

Step 3 Turn the oven control(s) to the required temperature and if necessary select the appropriate

To cancel an Auto Cooking Programme before the Cook Period has finished:

Other notes on Timer operation:

1 When cooking automatically the Cook Period can be checked at any time simply by pressing the Cook

Period button.

2 When cooking automatically the End Time can be checked at any time by simply pressing the End Time button.

3 Having set a Cook Period and End Time an electronic device stores the information. The device within the

Timer will switch the oven(s) on and off at the required times.

4 When setting an Auto Cooking Programme and a mistake is made, to clear:

(a) Press and release the Manual button.

(b) Start the sequence again.

5 If at any time the display shows three flashing zero's 0.00 and 'Auto', it is likely that the electricity supply to

the oven has been interrupted. Reset the Timer to the correct time of day.

Food in the oven may therefore not have been cooked, before serving check food is thoroughly heated and

completely cooked.

6 To set each function always press and hold the required function button and at the same time press the '+' or

'-' buttons.

oven function.

NOTE: The Cookpot symbol disappears

Step 4 Press and hold in the Cook Period, the display

will read 0.00 and the 'cookpot' symbol will

light up.

With the Cook Period button still held in, set the

required Cook period using the '+' and '-' buttons.

Example 1 hour 30 minutes (as shown).

Note: Cook Period is the length of time the food

requires to cook.

Step 5 Release all buttons.

The timer display will revert to the time of day, with the

'Auto' symbol lit and the 'cookpot' symbol remaining lit.

At the end of the Cook Period the 'Auto' symbol will

flash and an intermittent audible tone will be heard.

The audible tone will continue unless cancelled. The

'Auto' symbol will continue to flash until the Timer is

returned to Manual operation (see below).

Step 6 Press the Manual button, the audile tone will

be cancelled and the oven(s) will be returned

to manual operation.

Step 7 Turn the oven control(s) to the OFF position.

Step 1 Turn the oven control(s) to the Off position.

Step 2 Press the Manual button to return the oven(s)

to Manual operation. The 'Auto' symbol will go

out.