Aeotec ZW164 Manuale di avvio rapido - Pagina 4

Sfoglia online o scarica il pdf Manuale di avvio rapido per Sistema di sicurezza Aeotec ZW164. Aeotec ZW164 7.

Quick Start.

Getting your Siren up and running is as simple as plugging it into a wall socket and linking it to your

existing Z-Wave network. The following instructions tell you how to link your Siren to your Z-Wave

network.

Install Mounting plate in the location of your choice.

1. Affix Siren 6 Wall Mount Plate in any desired location near an outlet.

a. Use 3x 20mm screws or double-sided tape.

b. Lock the Siren 6 into place where the mount is installed.

Pairing your Siren 6 into your existing Z-Wave network.

1. Power Siren 6 through the provided power adapter.

2. Ensure that Siren 6 LED is blinking slowly.

3. Set your Z-Wave gateway into pair / add device mode. (Refer to your Z-Wave gateway/controller

instruction manual on how to set it into pair mode).

4. Tap the Siren 6 Action Button once (quick). (If your gateway supports S2 encryption, enter the

first 5 digits of the DSK into your Z-Wave gateway interface to complete S2 encrypted pairing, DSK

is printed on the Siren 6 unit).

5. If Siren 6 has successfully paired to your Z-Wave gateway, the LED on Siren 6 will emit a solid

color for 30 seconds, then turn off. If in the case that the Siren 6 failed to pair, LED will continue to

blink slowly.