Whirlpool 3LCHW9100WQ0 Manuale di istruzioni per l'installazione - Pagina 13
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Lavatrice Whirlpool 3LCHW9100WQ0. Whirlpool 3LCHW9100WQ0 48. Semi-pro front-load washer
Stampa la pagina
5=
The cycle will determine whether clothing or other items are
in the washer.
a)
b)
If no items are detected in the washer, it will proceed
to Step 7.
If any items are detected in the washer, "rL" or "F-34"
will be displayed. Then the door will unlock.
•
Press DELICATES/KNITS to cancel the failure code.
Then repeat steps 1,3, and 4 to start the cycle again.
6. Once the cycle has begun, allow the cycle to complete.
7. After the cycle is complete, leave the door open slightly,
to allow for better ventilation and drying of washer interior.
Always do the following to maintain washer freshness
•
Use only detergent for automatic washer.
•
Leave the door slightly open after each cycle to allow for
better ventilation and drying of washer interior.
•
Clean the washer monthly using the Washer Maintenance
Procedure, 160 mL (2/3 cup) of liquid chlorine bleach.
•
If the procedure does not sufficiently improve the washer
freshness, please evaluate your installation and usage
conditions for other causes.
Cleaning the exterior
Use a soft damp cloth or sponge to wipe up any spills.
Occasionally
wipe the outside of your washer to keep it looking
new. Use mild soap and water. Do not use abrasive products.
Cleaning the dispenser drawer
The dispenser drawer is removable for easy cleaning.
1. Unlock the dispenser drawer by pressing the Release Lever.
Remove the drawer.
2. Remove the inserts (the siphon from the softener and bleach
compartments).
3. Wash the parts under running water.
NOTE: Do not wash components
in the dishwasher.
4. Replace the inserts and return the dispenser to the drawer.
Replace inlet hoses after 5 years of use to reduce the risk of hose
failure. Periodically inspect and replace inlet hoses if bulges,
kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, record the date of replacement.
ASSISTANCE OR SERVICE
If you need further assistance, you can contact the dealer/distributor
where the washer was purchased.
When you call, you will need the washer model number and serial
number. Both numbers can be found on the serial-rating plate
located on your washer.
For Warranty Terms and Conditions contact the dealer/distributor.
13