Whirlpool 4GWTW4740 Manuale d'uso e manutenzione - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Lavatrice Whirlpool 4GWTW4740. Whirlpool 4GWTW4740 47.
Anche per Whirlpool 4GWTW4740: Manuale di istruzioni per l'installazione (27 pagine), Manuale di istruzioni per l'installazione (27 pagine), Manuale di istruzioni per l'installazione (27 pagine)
Stampa la pagina
7,
Select
LOAD SIZE
U---- L OAD SIZE
Model 4GWTW4800
Select the load size setting most suitable for your load. Small
will add a low amount of water for smaller loads and Super will
add the most amount of water for large or bulky loads. Items
need to move freely.
8,
Select TEMPERATURE
"_-_TEMPERATURE
all cold rinses
Model 4GVVTW4800
Once you select a cycle, select the desired wash temperature
by turning the Temperature knob to the appropriate
setting
based on your load. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
energy. This may be cooler than
your hot water heater setting.
Warm
Some cold water will be added, so
this may be cooler than what your
previous washer provided.
Cool
Warm water may be added to
assist in soil removal and to help
dissolve detergents
Cold
This is the temperature
from your
faucet. If your tap cold water is very
cold, warm water may be added to
assist in soil removal
and help dissolve detergent.
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils
Dark colors that
bleed or fade
Light soils
9.
Select options
(on some models)
OPTIONS
Model
4GVVTW4800
Select the desired cycle options. If you are using fabric
softener, be sure to select one of the Fabric Softener Added
options.
Press START/Pause/Unlock
to begin wash cycle
_b START
Pause/Unlock
Hold
_
3 sec to
cancel
Press the START/Pause/Unlock
button to start the wash cycle.
When the cycle has finished, the DONE indicator will light.
Promptly remove garments after cycle has completed to avoid
odor, reduce wrinkling, and rusting of metal hooks, zippers,
and snaps.
Unlocking
the lid to add garments:
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock;
the lid will unlock once the
washer movement
has stopped. This may take several
minutes if the load was spinning at high speed. Then close
lid and press START/Pause/Unlock
again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump
out automatically.