Whirlpool 7MWTW1504DQ0 Manuale d'uso e manutenzione - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Lavatrice Whirlpool 7MWTW1504DQ0. Whirlpool 7MWTW1504DQ0 32.
Stampa la pagina- 1. Table of Contents
- 2. Washer Safety
- 3. What's New under the Lid
- 4. Control Panel and Features
- 5. Cycle Guide
- 6. Using Your Washer
- 7. Washer Maintenance
- 8. Troubleshooting
- 9. Quoi de Neuf Sous Le Couvercle
- 10. Tableau de Commande Et Caractc:ristiques
- 11. Guide de Programmes
- 12. Utilisation de la Laveuse
- 13. Entretien de la Laveuse
- 14. Di_Pannage
7,
Select
LOAD
SiZE
LOAD
SiZE
E× Large
o
Large
o
Medium
o
Select the load size setting most suitable for your load. Small
will add a low amount of water for smaller loads and Ex Large
will add the most amount of water for large or bulky loads.
Items need to move freely.
8,
Select WASH TEMP
WASH
TEMP
Hot o
Wam i!
Cool o
Cold o
Tap Cold o
Once you select a cycle, select the desired wash temperature
by turning the Wash Temp knob to the appropriate setting
based on your load. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp
Suggested
Fabrics
Hot
Some cold water is added to save
Whites and pastels
energy. This will be cooler than
Durable garments
your hot water heater setting.
Heaw soils
Warm
Some
cold water
will be added,
so
this will be cooler
than what your
previous
washer
provided.
Bright colors
Moderate to light soils
Cool
Warm water may be added to
assist in soil removal and to help
Cold
This is the temperature from your
faucet. If your tap cold water is
very cold, warm water may be
added to assist in soil removal and
help dissolve detergent.
Colors that bleed
or fade
;: Dark colors that
;;::i bleed or fade
Light soils
Wash Temp
Suggested Fabrics
Tap Cold
This is the temperature from
Dark colors that
your faucet,
bleed or fade
Light soils
fg.
Select options,
if desired
RINSE OPTIONS
o 1Rinse
o 2 Rinses
ol
Rinse
with
softener
o 2 Rinses
with
so_ener
Select the desired cycle options. If you are using fabric
softener, be sure to select one of the Fabric Softener options.
Press START/Pause
to begin wash cycle
Start/Pause
Ho_d 3 Seconds
to Cancel
Press the START/Pause button to start the wash cycle. When
the cycle has finished, the DONE indicator will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and rusting of metal hooks, zippers, and
snaps.
Unlocking
the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause; the lid will unlock once the
washer movement
has stopped. This may take several
minutes if the load was spinning at high speed. Then close
lid and press START/Pause again to restart the cycle.
If lid is left open for more than 10 minutes, the water will pump
out automatically.
WASHER MAINTENANCE
f
WATER INLET HOSES
Replace inlet hoses after 5 years of use to reduce the risk of
hose failure. Periodically inspect and replace inlet hoses if
bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of replacement
on the label with a permanent marker.
NOTE: This washer does not include inlet hoses. See the
"Installation
Instructions"
for more information.
8