Whirlpool Aquasteam 9559 Manuale di istruzioni per l'uso - Pagina 11
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Lavatrice Whirlpool Aquasteam 9559. Whirlpool Aquasteam 9559 15.
Stampa la paginaTROUBLESHOOTING GUIDE
Your washing machine is equipped with various automatic safety functions. These enable faults to be
detected in good time and the safety system can react appropriately. These faults are frequently so minor
that they can be removed within a few minutes.
Problem
Appliance does not start,
no indicator lamps are on
Appliance does not start
although "Start/Pause" has
been pressed
Appliance stops during the
programme, and the "Start/
Pause" light blinks
Detergent dispenser
contains residues from
detergent and/or additives
Appliance vibrates during
spin cycle
Final spin results are poor
Detergent residues on
laundry after wash
Programme time initially
displayed is lengthened /
shortened by a period of
time (only for appliances
having a display which
indicates the remaining
programme time)
• Plug is not properly inserted in socket.
• Socket or fuse does not function correctly (use a table lamp or similar
appliance to test it).
• the "On/Off" button has not been pressed (if available on your model).
• Door is not properly closed (see also "
• The "Child lock/Lock buttons" feature has been activated
on your model). To unlock the buttons, push the two buttons marked with the
key symbol simultaneously and hold them at least for 3 seconds. The key
symbol on the display disappears and the programme can be started.
• "Rinse hold" position of the "Variable spin" button is activated, and the "Rinse hold"
symbol
lights up in the programme sequence indicator. Press the "Start/
Pause" button to start the drain programme.
• Programme has been changed - reselect desired programme and press
"Start/Pause".
• Programme has been interrupted and eventually door has been opened - close
door and restart programme by pressing "Start/Pause".
• The appliance's safety system has been activated (see "Description of red
indications" in your programme chart).
• Water tap is not opened or water inlet hose is kinked or blocked ("Water tap
closed" indication lights up).
• Separator in main wash chamber is not correctly installed or not adapted to
use of powder and liquid detergent (see "Detergents And Additives").
• Water entering is not enough; the mesh filters of the water supply could be
blocked (see "Care And Maintenance").
• Transport bolts have not been removed; before using the washing
machine, it is imperative that the transport bolts are removed.
• Appliance is not level / not standing firmly on all four feet (see separate
"Installation Guide").
The appliance has an imbalance detection and correction system. If individual heavy
items are loaded (e.g. bathrobes), this system may reduce the spin speed automatically
or even interrupt the spin completely in order to protect the washing machine.
• Heavy item(s) prevented spinning; add smaller articles of laundry and repeat
spin cycle.
• Excessive foam formation prevented spinning; select and start "Rinse & Spin"
programme. Avoid excessive detergent dosing (see "Detergents And Additives").
• "Variable spin" button has been set to a low spin speed.
Whitish residues on dark fabrics are caused by insoluble compounds used in
phosphate-free powder detergents.
- avoid overdosing of detergent
- use liquid detergent
- select "Intensive Rinse" option if possible
- brush out the fabric
Normal capacity of the appliance to adapt to factors that can have an effect on
the wash programme time, e.g.: Excess of foam formation, load imbalance due
to heavy items of laundry, prolonged heating time resulting from reduced inlet
water temperature.
Due to such influences, the programme time is recalculated and updated if
necessary. On the display, an animation appears during such update
periods.
GB 10
Causes, Solutions, Tips
Child Safety
").
(if available