Whirlpool WSR57R18DH Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Frigorifero Whirlpool WSR57R18DH. Whirlpool WSR57R18DH 12.

Stampa la pagina

Refrigerator Door

Tools Needed: ⁵⁄₁₆" hex-head socket wrench, ³⁄₈" hex-head socket

wrench, flat 2" putty knife.

IMPORTANT:

Depending on the width of the opening, you may need to remove

the handle or door to move the refrigerator into the house.

All graphics referenced in the following instructions are included

later in this section after "Final Steps." The graphic may be reversed

if door swing is reversed.

Before you begin, turn the control OFF, and remove food and

adjustable door or utility bins from door.

Remove and Replace the Handle

To Remove the Handle:

1. Loosen the setscrews located on the side of handle at each end.

See Handle graphic.

2. Remove the handle from the grommets.

To Replace the Handle:

1. Place the handle onto the grommets making sure the grommets

are fitted into the handle holes.

2. Tighten the upper and lower setscrews with the hex key provided.

See Handle graphic. Do not overtighten the setscrews.

Remove Door and Hinges

1. Unplug refrigerator or disconnect power.

2. Keep the refrigerator door closed until you are ready to lift it free

from the cabinet.

NOTE: Provide additional support for the door while the hinges are

being moved. Do not depend on the door magnets to hold the door

in place while you are working.

3. Remove the parts for the top hinge as shown in Top Hinge graphic.

4. Lift the refrigerator door free from the lower hinge and cabinet and

set aside.

5. Remove the four hex-head hinge screws and bottom hinge

assembly. See Bottom Hinge graphic.

Hinge screws

Replace Door and Hinges

NOTE: Graphic may be reversed if door swing is reversed.

1. Replace the parts for the bottom hinge as shown and tighten

screws. See Bottom Hinge graphic. Replace the refrigerator door.

NOTE: Provide additional support for the door while the hinges are

being moved. Do not depend on the door magnets to hold the door

in place while you are working.

2. Assemble the parts of the top hinge as shown in the Top Hinge

graphic. Do not tighten the screws completely.

Final Steps

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

1. Plug into a grounded 3 prong outlet.

2. Reset the control. See "Using the Control."

3. Return all removable door parts to door and food to refrigerator.

WARNING