Clam 16610 Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Attrezzatura da pesca Clam 16610. Clam 16610 15.

1. LAY TWO OF THE HOOP POLES TOGETHER ON FLOOR AND ASSEMBLE WITH

FASTENERS AS SHOWN

2. SCREW IN THE PROPER SCREWS INTO PLATE DO NOT OVERTIGHTEN.

3. WHILE HOLDING THE SCREW IN PLACE START TO THREAD THE NYLOCK NUT ONTO

THE SCREW AND TIGHTEN BY HAND UNTIL RESISTANCE IS FELT. THEN USING 7/16 SOCKET

OR WRENCH CONTINUE TO TIGHTEN NUT UNTIL IT IS EVEN WITH END OF SCREW. DO NOT

OVERTIGHTEN.

STEP-3

SLIDE CLIP ONTO POLE AND SNAP INTO THE TWO HOLES

LOCATED ON THE HOOP BEFORE ADDING FASTENERS.

INTO

POLES SHOULD MOVE

EASILY, DO NOT OVERTIGHTEN

DO NOT USE NUT

WITH THIS SCREW.