Whirlpool 27' Manuale di istruzioni per l'installazione - Pagina 8

Cutout Height is between 26¹⁵⁄₁₆" (68.4 cm) and 27¹¹⁄₁₆"

(70.3 cm)

1. Using 2 or more people, place the oven on its back on a

covered surface.

2. Remove the foot from the right front spacer by removing the

#8-18 x ³⁄₈" screw.

NOTE: Do not remove the spacer.

A. Spacer

B. Foot

C. #8-18 x

3. In the same manner, remove the feet on the right rear, left

front, and left rear of the oven.

4. Using 2 or more people, place the oven in its upright position.

5. Go to the "Make Electrical Connection" section.

³⁄₈

" screw

Cutout Height is between 28¹¹⁄₁₆" (72.8 cm) and 29⁷⁄₁₆"

(74.8 cm)

1. Using 2 or more people, place the oven on its back on a

covered surface.

2. Remove the foot from the right front spacer by removing the

#8-18 x ³⁄₈" screw.

NOTE: Do not remove the spacer.

A. Spacer

B. Foot

C. #8-18 x

3. Rotate the foot 90° so the short side of the foot is positioned

toward the top of the oven.

4. Reinstall the foot to the spacer using the #8-18 x ³⁄₈" screw

previously removed.

5. In the same manner, remove, rotate and reinstall the feet on

the right rear, left front, and left rear of the oven.

³⁄₈

" screw