Whirlpool 4KAED4900 Manuale d'uso e manutenzione - Pagina 4
Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Asciugatrice Whirlpool 4KAED4900. Whirlpool 4KAED4900 36.
SPECIFICATIONS
These units are sold in multiple
regions with different
requirements for measuring capacity. Below are a few
of the valid forms of measure posted on this product:
Dry Linen Capacity:
A weight measure that reflects a
maximum load size that can be loaded into the dryer.
Test Capacity:
A capacity measure that represents the
capacity at which safety testing was completed.
Dry Linen Capacity
10,5 kg (23 Ib)
Test Capacity
9,97 kg (22 Ib)
]
J
J
J
CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent,
Failure to follow
these instructions can result in death
or fire,
fGood
air flow
Along with heat, dryers require good air flow to efficiently
dry laundry. Proper venting will reduce your drying times and
improve your energy savings. See Installation Instructions.
The venting system attached to the dryer plays a big role in
good air flow.
Service calls caused by improper venting are not covered by
the warranty and will be paid by the customer, regardless of
who installed the dryer.
Maintain
good air flow by:
[]
[]
Cleaning your lint screen before each load.
Replace plastic or foil vent material with 102 mm (4")
diameter heavy, rigid vent material.
0
lo2 mm
(4")
t
[] Use the shortest length of vent possible.
[]
Use no more than four 90 ° elbows in a vent system;
each bend and curve reduces air flow.
[]
[]
[]
Bet
Remove lint and debris from the exhaust hood.
Remove lint from the entire length of the vent system at
least every 2 years. When cleaning is complete, be sure
to follow the Installation Instructions supplied with your
dryer for final product check.
Clear away items from the front the dryer.
_'
%
Use Automatic
Dry Cycles
for Better
Fabric
Care and Energy Savings
__
cycles, drying air temperature
or moisture level are sensed in the load. This sensing occurs throughout
the drying cycle and the
dryer shuts off when the load reaches the selected dryness.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying._
Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
4