Whirlpool AWD712S2 Manuale d'uso e garanzia online - Pagina 15

Sfoglia online o scarica il pdf Manuale d'uso e garanzia online per Asciugatrice Whirlpool AWD712S2. Whirlpool AWD712S2 44.

In the exhaust vent

Lint must be removed every 6 months, or sometimes more frequently, depending on the

frequency of usage.

4.4 Clean the lint filter

The lint filter is located inside the dryer door. A filter clogged with lint may increase drying time.

IMPORTANT:

• Do not operate the dryer with a loose, damage, clogged or missing lint filter. Doing so can

cause overheating and damage both the dryer and the clothing.

• If lint falls into the dryer when removing it from the filter, check the ventilation hood and

remove the lint. See "Ventilation System in page 7 ."

Cleaning when needed

Residue from laundry detergent and fabric softener may accumulate in the lint filter. This

accumulation may cause prolonged drying times for your clothing or cause the dryer to stop before

its load is completely dried.The filter is probably clogged if lint falls from it while inside the dryer.

Clean the lint filter with a nylon brush every 6 months or more frequently if it is being clogged

due to the accumulation of residues.

To wash it:

1. Remove lint from the filter by rolling it with your fingers.

2. Wet both sides of the lint filter with warm water.

3. Wet a nylon brush with warm water and liquid detergent. Scrub the lint filter with the brush

to remove the accumulated residues.

To clean:

1. Pull the filter straight up. Remove lint from the filter

by rolling it with your fingers. Do not rinse or wash the

filter to remove the lint.

2. Push the lint filter firmly until it locks back into place.