Whirlpool Cabrio,- WED7300X Manuale d'uso e manutenzione - Pagina 12

Stampa la pagina

Whirlpool Cabrio,- WED7300X Manuale d'uso e manutenzione

TROUBLESHOOTING

First try the solutions suggested here or visit our website at www.whirlpool.com/help

for assistance and to possibly avoid a service call.

Check the following for

Feet may not be in contact with the

Front and rear feet must be in firm contact with floor, and washer

proper installation or see

floor and locked,

must be level to operate properly. Jam nuts must be tight

"Using Your Washer"

against the bottom of the cabinet.

section.

Washer may not be level.

Check floor for flexing or sagging. If flooring is uneven, a 3/4"

(19 mm) piece of plywood under your washer will reduce sound.

Load could be unbalanced.

See "Level the Washer" in Installation Instructions.

Load dry items in loose heaps evenly around basket wall.

Adding wet items to washer or adding more water to basket

could unbalance washer.

Do not overload. Do not fill above the stainless steel portion of

basket. Avoid washing single items.

Use Bulky Item cycle for oversized, non-absorbent

items such as

comforters or poly-filled jackets.

See "Cycle Guide" and "Using Your Washer" in this Use and

Care Guide.

Clicking or metallic

noises

Gurgling or humming

Objects caught in washer

drain system.

Washer may be

draining water.

Empty pockets before washing. Loose items such as coins

could fall between basket and tub or may block pump.

It may be necessary to call for service to remove items.

It is normal to hear metal items on clothing such as metal snaps,

buckles, or zippers touch against the stainless steel basket.

It is normal to hear the pump making a continuous humming sound

with periodic gurgling or surging as final amounts of water are

removed during the spin/drain cycles.

Check the following for

proper installation:

Washer not level.

Fill hoses not attached tightly.

Fill hose washers

-Drain hose connection

Check household plumbing for leaks

or clogged sink or drain

Washer not loaded properly.

Water may splash off basket if washer is not level.

Check that load is not unbalanced or overloaded.

Tighten fiIFhose connection.

Are all four fill hose flat washers properly seated?

Pull drain hose from washer cabinet and properly secure it to

drainpipe or laundry tub.

Do not place tape over drain opening.

Water can backup out of a clogged sink or drainpipe. Check all

household plumbing for leaks (laundry tubs, drain pipe, water

pipes, and faucets.)

Improper loading can cause basket to be out of alignment

and cause water to splash off tub. See "Getting Started"

for loading instructions.

Not enough water

in washer

Load not completely covered

in water.

This is normal operation for an HE low-water washer. The load will

not be completely unden._/ater.The washer senses load sizes and

adds correct amount of water for optimal cleaning. See "What's

New under the Lid."

IMPORTANT: Do not add more water to washer. The added water

lifts the load off the washplate, resulting in less cleaning.