Whirlpool Duet GGW9200LQ0 Manuale d'uso e manutenzione - Pagina 15
Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Asciugatrice Whirlpool Duet GGW9200LQ0. Whirlpool Duet GGW9200LQ0 48. Electronic gas dryer
Stampa la pagina
DRYER USE
/
/
Explosion
Hazard
Keep flammable
materials
and vapors,
such
as
gasoline,
away from dryer.
Do not dry anything
that has ever had anything
flammable
on it (even after washing).
Failure to follow these instructions
can result in
death,
explosion,
or fire.
o H¢gh
o M_d_um
0 Lov,
0 Louder
0 _xuu t_¢
0 5oft_f
0 o_
o Mody
o off
Wnnkte Shield
Tempet_ttzre
EndOfCydeS_al
\
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
The following is a guide to starting your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before or after each cycle.
2. Place laundry into dryer and shut door. See "Loading."
3. Rotate the dial to select either an Automatic
or Manual Cycle
then press the CONTROL ON button. The preset settings and
drying time for the cycle chosen will be displayed.
To use an Automatic
Cycle
Point the dial to an Automatic Cycle.
Select DRYNESS LEVEL to adjust how dry you want the
load to be. The time displayed is an estimated length of
the cycle based on the Dryness Level selected. As the
cycle runs, the control senses the dryness of the load and
adjusts the time automatically for the selected Dryness
Level.
0 More
0
0 Less
Fire Hazard
No washer can completely
remove oil
Do not dry anything
that has ever had any type of
oit on it (including
cooking
oite).
Items containing
foam, rubber, or plastic
must be
dried on a clothesline
or by using an Air Cycle.
Failure to follow these instructions
can result in
death or fire.
Dryness
Level
NOTE: Time is not adjustable for Automatic
Cycles. Pressing
the More Time or Less Time buttons will cause a triple beep,
indicating that the time cannot be changed.
Press the WRINKLE SHIELD
TM
feature button if this
option is desired.
Press the END OF CYCLE SIGNAL button to set signal
volume to desired level.
Press (and hold) HOLD TO START button until dryer starts
(about 1 second).
Once an Automatic
cycle has started, the WRINKLE
SHIELD
TM
feature and the End of Cycle Signal level can be
adjusted. Press the PAUSE/CANCEL key twice to stop the
dryer and clear the settings, allowing you to select another
cycle and Dryness Level.
15