Whirlpool GGC9858EZ0 Manuale d'uso e manutenzione - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Asciugatrice Whirlpool GGC9858EZ0. Whirlpool GGC9858EZ0 24. 27" electric and gas dryers
Stampa la pagina
O
PERATING
To get the best dryer results possible, you must use your dryer correctly. This section tells you how
to use your dryer properly and efficiently.
S
TARTING YOUR DRYER
wWARNING
Explosion Hazard
Keep flammable materials and vapors, such
as gasoline, away from dryer.
Do not dry anything that has ever had
anything flammable on it (even after
washing).
Failure to follow these instructions can
result in death, explosion, or fire.
Before using your dryer, wipe the dryer drum with
a damp cloth to remove dust from storing and
shipping. If your dryer has a Features Guide,
remove it and place it with this Use and Care Guide.
1.
Load clothes loosely into the dryer and close the
2.
Turn the Cycle Control knob to the recommended
8
Y
D
OUR
RYER
door. Do not pack the
dryer; allow space for
clothes to tumble freely.
cycle for the type of load
being dried, as described
in "Cycle descriptions"
later in this section.
•
Use the Energy
Preferred Automatic
Setting ( * ) to dry most
loads.
NOTE:
On some models,
the Temperature selector
is part of the Cycle
Control knob.
wWARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any
type of oil on it (including cooking oils).
Items containing foam, rubber, or plastic
must be dried on a clothesline or by using
an Air Cycle.
Failure to follow these instructions can
result in death or fire.
3.
If your dryer has a Temperature selector, set it to
the recommended setting for the type of fabric
being dried. The cycle descriptions on the
following pages include temperature setting
suggestions.
4.
(OPTIONAL STEP) Some dryers have an On/Off
FINISH GUARD
®
selector. The FINISH GUARD
feature protects your clothes from wrinkling when
you do not remove them from the dryer as soon
as it stops.
•
Set the FINISH GUARD selector to On to
tumble the load without heat every few minutes
up to 45 minutes after the drying cycle ends.
•
A signal will sound every few minutes while
FINISH GUARD is running if the Cycle Signal
(End of Cycle Signal) feature is set to On. On
some models, this signal is fixed and cannot be
turned off. The signal and cycle end when you
open the dryer door.
•
Set the FINISH GUARD selector to Off if you do
not want to run this feature.
NOTE:
Some dryers have a FINISH GUARD
feature that cannot be turned On or Off. See
"Cycle descriptions" later in this section.