Whirlpool WGD71HEDW Manuale di istruzioni per l'installazione - Pagina 21

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Asciugatrice Whirlpool WGD71HEDW. Whirlpool WGD71HEDW 44.

Move the door strike

Using a TORX

T25

screwdriver, remove the 2 screws

securing the door strike to the door frame of the dryer.

Remove the 4 screws above and below the door strike and

set aside for later use. Rotate the strike 180° and attach to

the opposite side of dryer door frame, as shown.

Remove inner door from

outer door

Release tab

Position the door with the inside of the door facing up. Using

a Phillips screwdriver, remove the 13 screws securing the

inner door to the outer door. Lift off the inner door and set

aside.

NOTE: There is a small release tab on each side of the door.

If the inner and outer door do not separate easily, slide a

credit card, putty knife, or similar flat object between the inner

and outer doors at the locations shown to release the tab.

Latch

Using a TORX

securing the latch plate and the 5 screws holding the hinge

assembly in place.

Latch

Release tab

Using a TORX

hinge assembly on the opposite sides from which they were

removed.

Remove hinge and latch

from inner door

T25

screwdriver, remove the 3 TORX

Reinstall hinge and latch on

opposite sides

T25

screwdriver, reinstall the latch plate and

Hinge

screws

Latch