Whirlpool WGD9371YW Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Asciugatrice Whirlpool WGD9371YW. Whirlpool WGD9371YW 32. Installation guide
Anche per Whirlpool WGD9371YW: Manuale di istruzioni (8 pagine), Manuale d'uso e manutenzione (40 pagine), Manuale di installazione (36 pagine)

Attach short hose and "Y" connector

Fig. A

If space permits, attach the brass female end of the "Y"

connector to the cold water faucet. See figure A.

If "Y" connector cannot be attached directly to the cold water

faucet, the short hose must be used. See figure B. Attach

short hose to cold water faucet. Screw on coupling by hand

until it is seated on faucet. Then attach "Y" connector to

brass male end of the short hose. Screw on coupling by hand

until it is seated on connector.

Tighten couplings

Using pliers, tighten the couplings with additional

two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can

result.

Attach long hose to "Y"

connector and tighten couplings

Fig. B

One end of the long hose has a wire mesh strainer inside the

coupling. Attach this end to the "Y" connector. Attach washer

cold inlet hose to other side of "Y" connector. Screw on

coupling by hand until it is seated on connector. Using pliers,

tighten the couplings an additional two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can

result.

Attach long hose to dryer fill valve

and tighten coupling

Attach other end of long hose to

fill valve at bottom of dryer back

panel. Screw on coupling by hand

until it is seated on fill valve connector. Using pliers, tighten

the couplings an additional two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can

result.