Whirlpool WGD9750WW Manuale d'uso e manutenzione - Pagina 7
Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Asciugatrice Whirlpool WGD9750WW. Whirlpool WGD9750WW 28. Whirlpool electronic dryer use and care guide
Anche per Whirlpool WGD9750WW: Specifiche tecniche (8 pagine), Manuale di istruzioni per l'installazione (32 pagine)
Stampa la pagina
Manual Cycles
Use Manual Cycles to select a specific amount of drying time and
a drying temperature. When a Manual Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing the ADJUST MANUAL DRY TIME up or down
buttons and the temperature by pressing the Temperature button.
Manual Preset Cycle Settings
Manual Cycles
Load Type
TIMED DRY
Heavyweight items,
bulky items, bedspreads,
work clothes
QUICK DRY
Small loads
*Reset time to complete drying, if needed.
Air Only
Use Timed Dry/Air Only temperature setting for items that require
drying without heat such as rubber, plastic, and heat-sensitive
fabrics. This chart shows examples of items that can be dried
using Air Only.
Type of Load
Foam rubber - pillows, padded bras, stuffed toys
Plastic - shower curtains, tablecloths
Rubber-backed rugs
Olefin, polypropylene, sheer nylon
*Reset time to complete drying, if needed.
When using Air Only
■
Check that coverings are securely stitched.
■
Shake and fluff pillows by hand periodically during the cycle.
■
Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Automatic Cycles are not available when using the Air Only
setting.
Steam Cycles
In these cycles, a small amount of water is sprayed into the dryer
drum after several minutes of tumbling with heat. The STEAM
Status Light will come on while the water is sprayed into the drum.
The dryer will continue to tumble at Medium heat for the duration
of the cycle. The Steam Cycles include Quick Refresh and
Enhanced Touch Up. The cycle time is adjustable for the Quick
Refresh Cycle based on the Number of Garments selected. The
heat setting and cycle time may be adjusted for the Enhanced
Touch Up Cycle.
NOTE: Results may vary depending on fabric. 100% cotton
garments with wrinkle-free finish may yield better results than
those without.
Temperature
Est. Cycle
Time*
(Minutes)
High
40
Medium
15
Est.
Time*
(Minutes)
20 - 30
20 - 30
40 - 50
10 - 20
Use of a fabric softener sheet is not recommended with steam
cycles as it may cause temporary staining on the clothes.
Steam Preset Cycle Settings
Timed Cycles
Load Type
QUICK REFRESH
Helps to smooth out wrinkles
and reduce odors. Estimated
Time Remaining based on
Number of Garments
selected.
ENHANCED TOUCH UP
Helps to smooth out wrinkles
in loads left in the dryer for
an extended period.
*To program the Quick Refresh Cycle, turn the selector knob to
"Quick Refresh." Use a combination of buttons by pressing
NUMBER OF GARMENTS and selecting 1-4, 5-8, or 9-12
garments. Pressing ADJUST MANUAL DRY TIME options + or -
to manually increase by increments of 1. Number of Garments
will display in the Estimated Time Screen. Cycle time will be
displayed when Start is pressed.
*The Enhanced Touch Up Cycle has a minimum dry time of
15 minutes and a maximum dry time of 40 minutes. Only the
Medium and High temperature settings can be used for the
Enhanced Touch Up Cycle.
Additional Features
Reduce Static
An option that can be added to any Auto Cycle to Reduce Static
that may build up in loads as they tumble. The Reduce Static
feature periodically tumbles, stops, and sprays a small amount of
water over the load to help keep static from forming.
NOTE: By pressing REDUCE STATIC, your cycle will add
miniminal extra time.
WRINKLE SHIELD™ STEAM Feature
When you are unable to remove a load of clothes from the dryer
as soon as it stops, wrinkles can form. The WRINKLE SHIELD™
STEAM feature periodically tumbles, rearranges, and fluffs the
load to help keep wrinkles from forming.
■
Get up to 140 minutes of periodic tumbling at the end of a
cycle. Turn off at any time by pressing the WRINKLE
SHIELD™ STEAM button.
■
After 60 minutes of WRINKLE SHIELD™ STEAM operation, a
short 15 minute Steam cycle is used to smooth out wrinkles.
Default
Est. Time*
Temperature*
(Minutes)
Medium
12-29
Medium
20
7