Clank Chaos Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Apparecchiature di registrazione Clank Chaos. Clank Chaos 2.
Anche per Clank Chaos: Manuale (10 pagine), Manuale (12 pagine)

Stampa la pagina

This sheet is intended to be a quick view of the module. For a more detailed guide

please refer to the online manual over the dedicated page at clank.eu

Clock in (gate, 0/10v) [1]. If nothing is

patched, channel 1 will be the master clock.

Loop in (gate, trigger 0/10v) [2]. A gate or

a trigger will start looping, the successive

one will stop it.

External cv in (cv, 0/8v) [3]. Depending on

wich function it's assigned to, an external

CV can be used to control some of Chaos

parameters.

Chaos in (gate, trigger 0/10v) [4]. A gate

or a trigger will randomize all the values of

every channel.

Clock out [5]. A 50% pwm gate output

reflects the master clock time. (gate 0/8v)

Ch. Gate outs 1-6 [6]. (gate 0/8v)

Ch. Cv outs 1-6 [7]. (0/8v)

Channel bar [8]. LEDs will reflect the output

intensity of each CV. Selected channel will

be highlighted in red.

Value bar [9]. By default it indicates the

CV value of the selected channel. When

a button is pressed it shows the function

value/setting.

Encoder [10]. Scroll to select channel from

1 to 6, the seventh position will select all the

channels togheter.

Press the encoder to fire up the Chaos

function (4). Keep pressed while rotating to

edit the entropy value.

Modifiers* [11]. Hold a button and turn the

encoder to change the modifier value in the

selected channel.

CHAOS Quickstart manual.

Hi, thank you for purchasing CHAOS.

Loop button [12]. Press it to start looping,

press again to stop it. Hold and turn the

encoder to change the loop lenght. Loop

modifiers can be edited independetly from

random ones, just hold loop and one of

the modifiers togheter. To return to default

looped values double tap on the loop button.

Input assign**[13]. Hold to visualize input

assign options for the selected channel.

The four leds corresponds to the four inputs

on the first row. Green means [ON], white

means [OFF].

2nd function: Channel start/stop. Double

tap to access to this menu. Modifiers and

Loop buttons now will correspond to each

one of the six channels. To leave this page,

just tap on Input assign button.

Quant/Slew [14]. Press for slewing the CV

out. Tap and hold

amount.Hold and turn the encoder to

change the quantizer scale***.

Save/recall [15]. Hold to enter in the save/

recall menu. Scroll the encoder to select one

slot. Release the button to recall or press the

encoder to save.

2nd function: Copy and paste. Tap the

Memory access button to copy a channel

settings, its LED will start blinking. Go to

another channel and press this button again

to paste the copied values.

3nd function: Channel Reset. Double tap

on the memory access button, now all the

channel settings have been restored to

default values.

to adjust the slewing