Whirlpool AKR 526 IX Manuale di installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione per Cappa di ventilazione Whirlpool AKR 526 IX. Whirlpool AKR 526 IX 7. 55cm flat screen hood in stainless steel akr 526 ix

Stampa la pagina

MATERIAL SUPPLIED

Remove all the components from the packets. Check that all the components are included.

• Hood assembled with motor and lamps installed.

• Air outlet protection

• Support bracket

• Assembly template

• Filter

• Power cable

• Instruction manual

• 1 adapter Torx T10

• 1 adapter Torx T20

• 2 washers

• 1 cable clamp

• 4 plugs 8 x 40 mm

• 4 screws 5 x 45 mm

• 3 screws 3.5 x 9.5 mm

• 2 screws M4 x 16

INSTALLATION - PRELIMINARY ASSEMBLY INSTRUCTIONS

The hood is designed for installation and use in "Extractor Version" or in "Filter Version".

Extractor Version

IMPORTANT: The flue kit must be purchased in order to use the hood in "Extractor Version"; it must be ordered and fitted before use.

Fumes are extracted and expelled outside via an exhaust pipe (not supplied) fixed to the hood exhaust pipe connector.

Depending on the exhaust pipe purchased, provide for suitable fixing to the exhaust pipe connector.

IMPORTANT: If already installed, remove the carbon filter/s.

Filter Version

IMPORTANT: The flue kit must be purchased in order to use the hood in "Filter Version with flues"; it must be ordered and fitted before use.

Air is filtered through the carbon filter/s and recycled into the surrounding environment.

IMPORTANT: Check that air recirculation is facilitated.

If the hood does not have a carbon filter/s, order one/them and fit it/them before use.

The flue kit, available to purchase separately, includes the following components:

Deflector

Top and bottom flue

Collar

Install the hood away from very dirty locations, windows, doors and sources of heat.

The hood comes supplied with all the materials required for installation on most walls/ceilings. However, a qualified technician is required to ensure that the

materials are suitable for your ceiling.

INSTALLATION DIMENSIONS

Adjacent wall units

650/900 mm min

45 cm (gas or combi cookers)

40 cm (electric cookers)

Adjacent wall units

centre line

hob surface

GB12