Whirlpool AKR602ELIX Manuale di installazione/montaggio - Pagina 11

Sfoglia online o scarica il pdf Manuale di installazione/montaggio per Cappa di ventilazione Whirlpool AKR602ELIX. Whirlpool AKR602ELIX 37.

Stampa la pagina

1. Control panel.

Light

move the switch to the right or press the button to switch

on.

Extraction speed

Move the switch to the right or press the next button to

increase extraction speed (or open the electric shutter )

2. Grease filters.

3. Lamp covers

(or halogen lamps, depending on the model).

4. Telescopic flue.

Grease filters:

Metal grease filters have an unlimited

life and should be washed once a

month either by hand or in a

dishwasher at a low temperature and

with a short cycle.

Note: Washing in a dishwasher can

cause grease filters to turn white, but

this in no way affects efficiency.

a. press the handle to remove the

filter

b. remove it.

Wash the filter and leave it to dry, proceeding in reverse

order to refit it.

Bulb/s:

Remove the filters and remove the burnt-out bulb.

Refit the filters.

5019 318 33287

Replacing the halogen bulbs:

1. Disconnect the hood from the mains power supply.

WARNING: Wear gloves.

2. Use a small screwdriver to gently prise the lamp cover off

(at the points indicated in Fig.).

3. Remove the burnt-out lamp and fit a new one.

WARNING: Replace using 20W max G4 halogen bulbs

only.

Close the lighting unit (snap-on).

Fitting or changing the carbon filter

(filter versions only).

Change the carbon filter every six months.

1. Remove the grease filters.

2. Fit the filter/s to cover the motor according to the model:

• Align the pins R on the cowl with the slots S, then

turn the filter clockwise until it locks in place

• turn the central handle clockwise.

3. Reverse the above procedure to remove the carbon

filter.

4. Refit the grease filters.