3Com 4200G Series Manuale di installazione

Sfoglia online o scarica il pdf Manuale di installazione per Hardware di rete 3Com 4200G Series. 3Com 4200G Series 4. 3com switch 4200g gigabit family
Anche per 3Com 4200G Series: Manuale del prodotto (13 pagine), Manuale del prodotto (15 pagine), Manuale del prodotto (15 pagine), Scheda tecnica (8 pagine), Scheda tecnica (8 pagine)

1.1 Appearance and front panel

Figure 1 Appearance of an XFP interface module

Figure 2 Front panel an XFP interface module

1.2 Installation

Step 1: Put on an ESD-preventive wrist strap and verify it is properly

grounded. Then remove the XFP interface module from the package.

Step 2: Loosen the filler panel mounting screws on the rear panel of the

switch with a screwdriver and remove the filler panel.

Step 3: Hold the fastening screws on the front panel of the XFP interface

module, and gently push the module in along the slot guide rail until the

module is in close contact with the switch.

Step 4: Tighten the fastening screws with a screwdriver to secure the XFP

interface module.

3Com Switch 4200G

10G Interface Module

Installation Guide