Firesense 60757 Manuale - Pagina 12

Sfoglia online o scarica il pdf Manuale per Camino da interno Firesense 60757. Firesense 60757 13. Wall mount electric fireplace

Stampa la pagina

TROUBLESHOOTING

TEMPERATURE LIMITING CONTROL

This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe temperature (115 C

heater will automatically turn off. To reset: Unplug unit from wall, wait for 5 minutes, plug back in and continue to use.

TROUBLESHOOTING

Symptom

Fireplace doesn't work

Flame is not moving

Dim or poorly visible

aren't glowing

Flame sputters

Remote control does

not work

Circuit breaker trips or

fuse blows when the

unit is on

heat when

turned on

Appliance turns off

and will not turn on

Possible Causes

Fireplace inner components are

overheating or the home circuit

breaker has tripped.

motor may be defective.

LED lights are burnt out or the wiring is

loose.

Flame motor is defective.

Low batter

Master switch is in "OFF" position

Improper circuit current rating.

Thermal switch has been tripped.

Circuit breaker has

been tripped.

Appliance has overheated and its

safety device has caused the

thermal

breaker has tripped.

Corrective Action

Reset switch

master switch off wait

5 min

s, then turn back on.

Call customer service for

Change the battery for remote control.

Check to make sure the master switch is

turned on.

Call customer service for instructions.

Turn the unit off and unplug the unit for 5

min

s. Plug back in and turn on the unit.

Turn off circuit breaker that supplies

circuit breaker back on.

Unplug the appliance, allow to cool

for 15 min

s, then plug back in.

Reset the house circuit breaker.

) the