Clarinet Systems ESB301 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Punto di accesso wireless Clarinet Systems ESB301. Clarinet Systems ESB301 6. Clarinet systems ethir lan esb301 access points: supplementary guide
Anche per Clarinet Systems ESB301: Specifiche tecniche (4 pagine), Manuale (9 pagine), Specifiche tecniche (4 pagine), Manuale supplementare (1 pagine), Specifiche tecniche (3 pagine), Manuale supplementare (1 pagine)

Stampa la pagina
Section 2
The (ESB101, ESB301,ESB1000, ESB3011b and the ESB208/216) are all DHCP enabled.
Insure a DHCP server is up and running on the network before uplinking. If there is no
DHCP
server on the network then do not uplink. You will have to configure the Switch first,
before uplinking to the network.
Single Port:
1.
Connect one end of the mini-DIN cable to the EthIR Beam and the other end
to the mini-DIN connector on the Switch.
2.
Connect one end of the RJ45 cable from the Ethernet uplink port
on the Switch to an Ethernet wall jack or hub.
3.
Connect power jack to the power jack port and plug into a 110/220 electrical
outlet.
Note: For the (ESB301) connect the additional Ethernet to desktop port to an Ethernet
NIC card in your desktop computer (Optional).
EthIR Switch (ESB101, ESB1000 and ESB3000)
rear view
RJ45 cable
EthIR Beam
Multiport (ESB208/216)
A: Housed in multi-user environment such as conference room or class room with one
available network wall jack.
After configuration is completed, perform the following:
1.
Position the Switch where convenient.
2.
Connect one end of an enclosed RJ45 cable to one of the bottom ports on the EthIR
Beam. Repeat for as many EthIR Beams as needed.
3.
Uplink the Switch to a wall jack or hub with an RJ45 patch cable (Cat 3 or 5).
4.
Power on the unit by connecting enclosed power cable to a 110/220 electrical outlet.
Power
outlet
EthIR LAN and
EthIR STAR
RJ45 wall jack
Button
ESB1000
Mini DIN cable