Clarinet Systems EthIR LAN ESB1000 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Punto di accesso wireless Clarinet Systems EthIR LAN ESB1000. Clarinet Systems EthIR LAN ESB1000 6. Clarinet systems ethir lan esb1000 access points: supplementary guide
Anche per Clarinet Systems EthIR LAN ESB1000: Specifiche tecniche (4 pagine), Manuale (9 pagine), Specifiche tecniche (4 pagine)

Stampa la pagina
EthIR Switch front view
RJ45 cable
EthIR Beam
B: Housed in the network equipment closet.
These switches can be placed in the wiring closet to provide either Infrared or Ethernet
connectivity to the existing wall jacks.
1.
Position Switch in wall rack.
2.
Connect the incoming RJ45 cable from each office or cubicle wall jack to one of the
bottom infrared ports on the Switch. Repeat as needed for each office cubicle
requiring infrared support.
3.
Connect another RJ45 cable from the corresponding top Ethernet pass-through port
to the patch panel or hub. Repeat as needed for each office cubicle requiring both
Infrared or Ethernet support. (NOTE: if only providing for Infrared connectivity this
step can be skipped).
4.
Uplink the Switch to the patch panel or hub with an RJ45 patch cable (Cat 3 or 5).
5.
Power on the unit by connecting enclosed power cable to a 110/220 electrical outlet.
EthIR Switch front view
(ES216/616 shown)
EthIR Beam
RJ45 wall jack
Ethernet rack
Optional
RJ45 wall jacks
or
Ethernet card
Power
outlet
RJ45 cable
Power
outlet