Clarinet Systems EtherUSB EA104 Manuale d'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso per Caricabatterie Clarinet Systems EtherUSB EA104. Clarinet Systems EtherUSB EA104 19. Usb ethernet access point for pda
Anche per Clarinet Systems EtherUSB EA104: Specifiche tecniche (2 pagine), Specifiche tecniche (2 pagine), Manuale d'uso (11 pagine), Manuale d'uso (15 pagine)
Stampa la pagina2.2 Hardware Installation
1. Connect the Ethernet cable to the EA104 Ethernet uplink (WAN) and the other end
to Ethernet switch/hub*.
2. Connect PDA to the EA104 USB port**.
3. Connect the power adapter to rear socket of the EA104, then into the wall outlet. If
power is present, the EA104 will proceed with normal power on sequence - self test
and boot up sequence within 25 seconds; once the Power LED is solid in color on
the front panel, the unit is ready.
• If the unit has a problem, the power LED will flash quickly.
• If the network connection has a Link, the Ethernet LED will blink green.
• If USB devices are connected & recognized by the EA104, the corresponding
LED will illuminate on the front panel.
To shut down the EA104, disconnect the AC power adapter. Do not shut down the EA104
when there is a PDA performing data communications since this may cause data to be lost.
Notes:
* In a non-DHCP environment, the system administrator must set up an enclosed DHCP
network by accessing the EA104 configuration using the browser-based AdminTool.
** Please refer "Appendix B – Mobile Windows 5.0 Device" for multiple WM5.0 devices
connection.
Clarinet Systems, Inc.
//www.clarinetsys.com
Page 6