Caldwell 309713 Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Sport e attività all'aperto Caldwell 309713. Caldwell 309713 4. Dual spinner target

Assembly Steps:

1. Snap one of the E-clips to the groove in the Shaft. (See Photo 3)

2. Slide the Targets and Bracket onto the end of the Shaft up to the E-clip as shown. (See Photo 4)

3. Snap the second E-clip to the shaft to secure the targets (See Photo 5)

4. Slide the Bushings onto the end of the shaft and secure with the Thumb Screws as shown. (Note:The holes in the

shaft and bushing must align). (See Photo 6)

5. Assemble the Frame Legs and Frame Uprights as shown. (See Photo 7)

6. Slide the Bushings on the end of the Shaft into the open end of the Frame Upright and secure using the Retaining

Pins as shown. (Note:The head of the bolts should be facing the shooter). (See Photo 8)

7. The Spinner is now fully assembled. The frame should always be oriented with the curved portion of the legs facing

the shooter as shown. (See Photo on Front Page)

NOTE: In some situations the Spinner Frame might slide or tip when shot. If this occurs, use the included Stakes to

anchor the frame to the ground. Stake holes are pre-drilled into the Frame Legs for this purpose.

Photo 3

Photo 5

Photo 4

Photo 6

Photo 7

Photo 8