Alcohol Countermeasure Systems DRIVESAFE Manuale di istruzioni - Pagina 12
Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di prova Alcohol Countermeasure Systems DRIVESAFE. Alcohol Countermeasure Systems DRIVESAFE 16. Breath alcohol tester
Stampa la pagina
BATTERY POWER
The DRIVESAFE personal alcohol tester requires 2 AA
alkaline batteries for operation.
In production, a plastic tab is inserted between the battery
and the electrical connection to conserve battery power
during shipment and storage.
To operate the tester for the first time, pull the plastic tab from
the battery compartment, which is accessible at the back of
the tester.
The tester can perform over 1,000 tests with a set of new
batteries.
BATTERY STRENGTH INDICATOR
A battery strength indicator appears on the bottom right
corner of the display when the DRIVESAFE tester is powered
on. When the battery strength indicator begins to flash, the
batteries require changing.
If the E01 error message appears on the display, there is
insufficient power to continue operation of the tester.
BATTERY INSTALL
Turn the tester off before removing the batteries. To install
new batteries, remove the back battery cover by pressing
down on the indent
and sliding the cover back.
CERTIFICATION
The DRIVESAFE personal alcohol tester and other breath
alcohol testing products of Alcohol Countermeasure Systems
comply with international standards for function and safety.
7
DRIVESAFE