AlcoLimit RBT Mini Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di prova AlcoLimit RBT Mini. AlcoLimit RBT Mini 15.

Install the Batteries:

Slide the cover on the rear of the unit upwards. Install 1 x AAA ALKALINE battery

checking the polarity is correct. DO NOT USE carbon or any other non-alkaline

batteries.

Replace the battery cover by inserting the lugs into the holes and sliding the cover

downwards.

Install the App.

This process must be completed once for every mobile device you wish to use/

pair your breathalyser with.

STEP 1. Download the "Alcofind (Universal)" Mobile App from the App Store

onto your mobile device.

To access a quicklink visit:

Check compatibility first! The app only works on the following devices:

iPhone 4S or later running iOS 7 and above

Android devices running OS 4.3 and above

STEP 2.

Go to 'Settings' on your mobile device and make sure Bluetooth® is

switched on. Pairing takes place within the Alcofind App, but

Bluetooth® must be switched on in 'Settings' first.

STEP 3. Open the app and select language and measuring unit eg: %BAC.

To adjust these later go to the Settings button in the bottom menu.

STEP 4. Press and hold the Power Button on your RBT Mini Breathalyser

for two seconds until the blue, green and red lights illuminate, then

release. Powering it on will allow it to be discovered.

STEP 5. The blue LED light will blink while it is connecting. Once successfully

connected the red and green lights light up and your app will show

START TEST.

STEP 6. For the first use you will need to enter the PIN code 000000.

AlcoLimit

INITIAL SET-UP

www.alcolimit.com.au/software

Mini ®

RBT

-5