Bad Elf Flex Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Ricevitore Bad Elf Flex. Bad Elf Flex 15.

Status information (LCD & LEDs)

The LCD display is the primary user interface of the Flex accessory

The LEDs are used to display information at-a-glance. Their function changes depending on

what mode you are in. The LCD screen will usually have a label or key that indicates what each

LED represents.

By default, the LEDs are configured to show the following status information:

Left LED

Center LED

Right LED

The power status LED is used to indicate the battery, charging, and operating status.

Color

Solid Green

Flashing Green

Red

Flashing Red

Connecting your mobile device via Bluetooth

The following steps will help you connect your mobile phone or tablet to the Flex receiver via

Bluetooth.

Start by making sure you Flex is turned on, and within range of your phone or tablet. Then

follow the instructions below:

For iPhone and iPad devices running iOS

● On your iOS Device, open the Settings app and navigate to the Bluetooth screen.

● If needed, turn Bluetooth on.

Power status

User configurable.

Default: shows GNSS navigation status

User configurable.

Default: shows Bluetooth connection status

Meaning

Fully charged

Charging

Battery Low

Battery critically low