ALcom CL-3350 INF Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Telefono cordless ALcom CL-3350 INF. ALcom CL-3350 INF 18. Digital enhanced cordless telephone with caller id function

Stampa la pagina

Using Handset Carrying Clip

The supplied handset carrying clip allows you

to conveniently carry the handset with you. It

clips easily to your belt, waist band, or shirt

pocket.

If you want to remove the carrying clip:

Insert a screw driver along the edge of one

of its arms and release the clip. Then lift it

off.

Using Earmic (optional)

The earmic jack is located in the middle

right side of the handset and is

2.5mm

standard plug. Simply plug the

earmic

into the jack and the

earmic

will be

activated.

Earmic jack

Note:

When the earmic is plugged into the

earmic jack, the microphone on the

handset will be deactivated.

Before Using

If you want to attach the carrying clip:

Attach the carrying clip to the back of the

handset. Make sure that the carrying clip

locks into place.

Earphone

Microphone

Clip

Earmic plug

Registering a New Handset

The handset which comes with the base unit

was already registered as handset 1. Each

additional handset you purchase must be

registered to the base unit.

Note:

A handset can be registered to up to 4

different base units. And a base can be

used with up to 6 handsets.

To register a handset:

1. Press the

button.

2. Press the

button to choose

, then press the

button.

3. Enter the PIN, then press the

button.

Note:

The PIN is preset to "0000" at the

factory. You can change the PIN. For

details, see page 22. If you want to

manufacturers to this base, you must

enter their PIN codes in this step.

4. Press the

button to choose

the base number you want, then press

the

button.

5. Press and hold the

button on the

base for more than 5 seconds, then the

IN USE indicator starts to blinks. Then

release the button.

Press

this button.

6. Press the

button.

Result:

The LCD window prompts you to

enter AC.

7. Enter your phone's AC (Authentication

Code), and press the

button. The

AC is "0000".

Note:

AC remains the same even if you want

to register other handsets from different

manufacturers to this base.

Result:

When the registration is properly

completed, the LCD window displays

the handset number, and returns to

Standby mode.