ALcom AT-5928 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Telefono ALcom AT-5928. ALcom AT-5928 12. Caller id phone

Stampa la pagina

GETTING STARTED

The unit requires 3 X 1.5V AA batteries. Open the battery compartment cover and insert the
1.
batteries in the right polarity, then close the cover (Proposal using alkaline battery). Or you
can buy a DC transformer (AC-DC adapter, Input Alternating Current 220V, Output DC 9V,
Current above 300mA, with the polarity
in reverse polarity.. There should be time display on the liquid crystal screen after the
batteries are inserted or DC is connected
Insert one end of the line cord to the line jack of the base and the other end to the wall outlet
2.
of exchange.
3. Connect the handset and the unit with coiled cord.
Setting the dialing mode to correct mode according to the directions from your local
4.
telecom.
Apply for the caller ID from your local telecom office.
5.

RECEIVING A CALL

When a call comes, the telephone rings, and LCD displays the seq. number of the call, the
1.
date, time, incoming number and the NEW icon. The MSG LED indicator will flash when
missed called.
2. If the same number is received again, and the previous call has not been reviewed, the LCD
displays REP icon.
When the incoming memory is full, the latest incoming number replaces the oldest number in
the memory
NOTE: For the phone to display incoming number and other information, you must have
an active Caller ID subscription with your local telephone exchange company.
 From handset
Pick up the handset and talk to the other party.
1.
2. When finished, return the handset to the base.
Switching to Hands free mode
When using the handset, press H.F key and return the handset to the base.
1.
When finished, press H.F key again.
2.
From Hands free mode
When the telephone rings, press H.F key and talk to the caller. For the other party to hear
1.
your voice clearly, speak into the MIC from a distance of 32cm or less.
When finished, press H.F key again.
2.
NOTE:
Generally telecom transmits the incoming message between the first ring and the second ring.
So please answer the phone after the second ring.

MAKING A CALL

 From handset
Pick up the handset.
1.
2. When you hear the dial tone, dial the desired number.
The unit will start to time the conversation after 6 seconds.
3.
) instead of battery, pay attention not to plug
4