Alcom Premium ADT1308 Manuale di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per Telefono Alcom Premium ADT1308. Alcom Premium ADT1308 18. Telephone

Stampa la pagina
Press OK key to enter missed call lists, received call lists or dialed call lists.
1.
The LCD will show the last record. (If no entries are available in the list, the LCD will be shown EMPTY).
2.
Press ▲ or ▼ key to view other record.
3.
4.
When the desired number is shown, press
When the record is shown, press OK key, use ▲ or ▼ key to choose. Then press OK key to confirm.
ADD TO PB : this function allows the user to add an entry from the caller list to the phone book.
1.
DELETE : this function allows the user to delete the currently selected entry from caller list.
2.
DELETE ALL : this function allows the user to delete all numbers.
3.
Note: In idle state, press ▲ key once to incoming records or press ▼ key to review outgoing records.
Handset Menu function 3: BS SETTINGS
The user is able to change the base setting in base settings menu, press OK key and use ▲ or ▼ key to select
this item. Then you can do as below:
DELETE ONE HANDSET
This function allows the user to delete a handset registration from the base.
Press OK key, the display will show DELETE HS
1.
Press OK key to enter, the user will be prompted to enter the PIN code.
2.
Input the correct 4-digit pin code using digit key (default PIN code is 0000). Press OK key to confirm.
3.
Press ▲ or ▼ key to scroll the handset names/number list up and down.
4.
Press OK key to confirm. The handset will be deleted from the base, and the display will show
5.
"UNREGISTERED".
DELETE ALL HANDSETS
1.
Press and hold
key 7 times slowly, the IN USE/CHARGE LED flashes quickly.
2. Press
3. Then IN USE/CHARGE LED will OFF and all the handsets would be unregistered from the base.

DIAL MODE

The user can select to change the mode in which the base will dial.
Press OK key, then using ▲ or ▼ key to select DIAL MODE.
1.
Press OK key to enter.
2.
Press ▲ or ▼ key to select the TONE or PULSE dial mode.
3.
Press OK key to confirm your selection.
4.
Note: As required by your telephone lines or PABX systems you may need to change the dialing mode
between Tone and Pulse.

FLASH TIME

The user can select the flash time (100ms, 300ms, 600ms and 1000ms) to meet the telephone line or PABX
requirement.
Press OK key, then using ▲ or ▼ key to select FLASH TIME.
1.
Press OK key to enter.
2.
Press ▲ or ▼ key to select the desired flash time from 100ms, 300ms, 600ms and 1000 ms.
3.
Press OK key to confirm your selection.
4.

MODIFY PIN

key for 5s, IN USE/CHARGE LED will flash,
or
key to dial out the number automatically.
9