AlcoMate AL6000 Manuale d'uso - Pagina 2
Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di prova AlcoMate AL6000. AlcoMate AL6000 4.
Device Operation
If you are using the Prestige for the first time, please install two 1.5V AA batteries
(included) and attach a mouthpiece to the unit.
1. Instructions
a) Press and hold the Power Switch to turn the unit on. The cumulative test count
will be displayed as you hold the Power Switch down. You can use the
cumulative test count to see when you should replace the sensor module (every 200
tests or at least once yearly).
b) Release the Power Switch. There will be a countdown from
the unit warms up.
c) Secure your lips around the mouthpiece and blow sharply and steadily into the
unit for about 4 seconds. You will hear two beeps when the device is done taking
the breath sample. You will see the digit
the device analyzes the sample.
d) When analysis is complete, you will see the blood alcohol concentration (BAC)
results displayed.
c) The results will be shown for about 15 seconds. The unit will then shut itself off.
d) If the device cannot take a successful sample, you will see
and the unit will shut itself off.
2. Understanding Your Results (BAC Reading)
Your Reading
0.00% to 0.01%
0.02% to 0.04%
0.05% and over
*
Drinking alcohol in ANY amount may impair the ability to drive. There is no "safe" level
Note: The maximum reading the device can show is 0.40%. A true BAC of 0.40% or
above may result in the onset of coma or even death by respiratory arrest. A reading
of 0.40% may indicate an acutely dangerous condition, but may also indicate a
sampling error (such as liquid alcohol blown into the device). Please carefully read
Warnings
the
section of this manual before operating the device.
Your Range
Safe
Moderate
Warning
of alcohol intake before driving. Don't drink and drive.
moving left to right in the display as
Description
*
range.
Little/no alcohol
intake.
*
range.
Increased alcohol
intake.
*
range.
Ability to drive may
be impaired.
to
as
in the display