XBOX 360 Documentazione per i consumatori - Pagina 18

Sfoglia online o scarica il pdf Documentazione per i consumatori per Immagazzinamento XBOX 360. XBOX 360 27. With bluetooth
Anche per XBOX 360: Manuale d'uso (14 pagine), Manuale d'uso (8 pagine), Manuale d'uso (10 pagine), Manuale d'uso (9 pagine), Manuale di istruzioni (25 pagine), Manuale d'uso (14 pagine), Manuale d'uso (14 pagine), Manuale d'uso (25 pagine), Manuale d'uso (2 pagine), Istruzioni per lo smontaggio (2 pagine), Manuale rapido (2 pagine), Manuale di avvio rapido (8 pagine), Manuale d'uso (31 pagine), Manuale (7 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (2 pagine), Manuale (6 pagine), Manuale d'uso (2 pagine), Manuale (2 pagine)

2. Position the hard drive over the hard drive bay with the narrow end (the front) pointed toward the

front of the console and the broad end (the back) pointed toward the back of the console.

3. Place the back of the hard drive against the back of the hard drive bay. Make sure the ridge along

the back of the hard drive rests beneath the lip on the back of the hard drive bay.

4. Push the front end of the hard drive down until the tab clicks.

Memory Units

You can also connect up to two portable memory units (sold separately) to the memory unit ports

on the front of your console for additional storage. Memory units are smaller than your hard drive,

but extremely portable, letting you easily take your Xbox Live profile or saved games to other Xbox

360 consoles. You can also take your memory unit to participating retailers and download content

from Xbox 360 demo kiosks.

Adding Wireless Controllers

Up to four controllers, wired and wireless, can be actively connected to a console at one time. Each

connected controller gets a quadrant on the Ring of Light. Before you can connect a wireless

controller, at least one quadrant must be free (unlit). To disconnect a wireless controller, press and

hold the wireless controller Xbox Guide button for three seconds, then choose to turn it off. For a

wired controller, disconnect the cable connector.

To connect your wireless controller to your console:

1. Press and hold down the Xbox Guide button until the controller powers on.