Xerox 3270 Manuale del programmatore - Pagina 20
Sfoglia online o scarica il pdf Manuale del programmatore per Stampante Xerox 3270. Xerox 3270 34. Xerox electronic documentation laser 3270 programmer's guide
Stampa la pagina3270 Programmer's Guide
Manipulation of Temporary and Permanent Memory
3.2.1. Functions where power off/on is needed
Function 1
Buffer Size
Function 7
Case
Function 14
Enable Graphics
Function 15
Baud Rate
Function 16
Number of Data Bits for Serial Input
Function 17
Parity for Serial Input
Function 18
Number of Stop Bits for Serial Input
Function 24
Port Selection
Function 38
IBM Communication Feature
3.2.2. Functions with no need for %X1 storing
Function 19
Duplex Printing (
Function 49
Restrict Access
Function 63
Define Logo (
3.3. Action at Power On
When you apply power to the converter, the following procedure will
be executed:
1. The permanent memory will be read to determine whether it con-
tains valid data. If so, the data will be loaded into the temporary
memory and normal operation will be started on the basis of the
permanent settings.
2. If the data in the permanent memory area is unreadable, it will be
cleared. The factory defaults are then read, and an error message
will be printed containing a description of the action taken. See
the chapter on Error Messages in the FSL and PCL
programmer's guides. Operation starts on the basis of the factory
default settings.
3. The converter checks the printer. If the printer is malfunction ing,
the converter's indicators will signal an error.
PCL & XES only)
FSL & PCL only)
- 20 -