Xerox 6100BD - Phaser Color Laser Printer Manuale - Pagina 21

Sfoglia online o scarica il pdf Manuale per Stampante Xerox 6100BD - Phaser Color Laser Printer. Xerox 6100BD - Phaser Color Laser Printer 34. Disk overwrite installation and usage
Anche per Xerox 6100BD - Phaser Color Laser Printer: Manuale di installazione (34 pagine), Specifiche tecniche (2 pagine), Manuale d'uso (32 pagine), Opuscolo e specifiche (4 pagine), Manuale d'uso (28 pagine), Manuale di installazione (2 pagine), Manuale di sicurezza (38 pagine), Manuale di installazione (2 pagine), Nota di rilascio (2 pagine), Manuale introduttivo (37 pagine), Manuale (34 pagine), Manuale introduttivo (34 pagine), Manuale d'uso (32 pagine), Manuale (11 pagine), Manuale di installazione e funzionamento (8 pagine)

DocuSP 3.6 to 3.7 Differences Document

PCL6 and PCLXL

¨ PCL6 is the next generation of the Hewlett-Packard LaserJet

PCL language. PCL XL is a new page description language

by Hewlett-Packard that is part of PCL6. PCL XL is designed

to optimally match the graphics printing requirements for

GUI-based applications, reducing the number of commands

required to describe a graphics page.

¨ The output from an enhanced PCL XL driver may not be the

same as the output from a standard PCL6 driver. If the

output is not as expected, the recommended solution is to

print using a PCL5e driver instead.

¨ DocuSP 3.7x supports printing PCL XL class 2.1 for color

and PCL XL class 2.0 for the black and white printing

products.

¨ XPPS 3.7 does not provide a PCL XL (PCL6) Xerox custom

printer driver. In order to take advantage of the PCL XL

features, a native HP PCL XL driver will have to be used.

Ensure the driver chosen supports the same class of PCL as

the DocuSP.

¨ Even with an HP PCL XL driver that supports the same class

of PCL as the DocuSP, some minor compatibility issues may

be seen due to commands within the PCL that are not

supported on the DocuSP controller. Contact your Xerox

customer support representative for assistance if necessary.

¨ Native HP PCL drivers do not support all of the features of

the DocuSP-based printer. Any printer specific features can

be programmed at the DocuSP controller after the job has

been submitted.

¨ DocuSP 3.7x still supports printing PCL 5e and the Xerox

custom PCL 5e drivers are still available for use.

Note: At this time, there are known problems with PCL XL on the

DocuSP controller. Xerox encourages your customer to evaluate

job printing and integrity using PCL XL. Any and all feedback is

welcome and appreciated.