Xerox DocuColor 1632 Manuale di risoluzione dei problemi - Pagina 28

Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi per Stampante Xerox DocuColor 1632. Xerox DocuColor 1632 28. Scan using ftp server
Anche per Xerox DocuColor 1632: Manuale di connessione rapida (2 pagine), Specifiche tecniche (2 pagine), Note sulla sicurezza (15 pagine), Manuale di avvio rapido (4 pagine), Manuale di avvio rapido (4 pagine), Manuale di avvio rapido (6 pagine), Manuale d'uso (36 pagine), Manuale di servizio (18 pagine)

Stampa la pagina
Xerox DocuColor 1632 Manuale di risoluzione dei problemi
U
G
( T
S E R
U I D E
R O U B L E S H O O T I N G
Fault Code
016-783
016-784
016-785
016-787
016-788
020-530
An error occurred. Switch
the machine Off then
back On again. (***-***)
Abnormal End (***-***)
5 – 2 4
)
•
Cause - Could not find the specified server path during file
forwarding by Scan Services.
•
Remedy - Check the path name of the server currently set to
the job template.
•
Cause - A write to server error occurred during file forwarding
by Scan Services.
•
Remedy - Confirm that there is sufficient space in the
directory on the server, and that access rights are present.
•
Cause - The file could not be sent due to insufficient space
on the server's hard disk by Scan Services.
•
Remedy - Delete unwanted data from the server's hard disk
to increase hard disk space.
•
Cause - The server IP address set to the job template is
illegal.
•
Remedy - Specify the correct job template.
•
Cause - Failed to retrieve the file from the Web browser.
•
Remedy - Refresh the browser page, or restart the browser,
or turn the machine off then on again. Try retrieving the file
again.
•
Cause - No correct operations were performed in a certain
period of time.
•
Remedy - Perform an operation within a certain period of
time.
•
Cause - An error occurred.
•
Remedy - Turn the machine Off, wait for the display on the
control panel to go out, then turn the machine back On again.
If the same message is displayed, record the message in
(***-***). Next, turn the machine Off, wait for the display on
the Control Panel to go out, then contact your Xerox
Customer Support Center.
•
Cause - An error occurred causing the operation to end
abnormally.
•
Remedy - Program the same operation again.
Cause/Remedy